Click Image to Expand
Product ID: WELPLA
Plasma Cutter Rental, 120/240V, 5/8 Max. Thickness
Details of Rental Item
Weight
23 lbs.
Shoulder Strap
Included
Duty Cycle
240 V Input, 27Amp. Duty Cycle 50%
Duty Cycle
120 V Input, 26Amp. Duty Cycle 35%
Duty Cycle
120 V Input, 20Amp. Duty Cycle 20%
Compressed Air Supply
90-120 PSI, 6 CFM
DELIVERY ESTIMATE
Rental Rates
1/2 day
$74.00
Day
$99.00
week
$297.00
28 days
$743.00
Selected accessories will also be added to cart
Click here to send a reservation request or to get more information.
Request Reservation
Tips and electrodes are included with your rental.

Cut mild steel and aluminum with this 120 or 240 volt plasma cutter rental. The more voltage the thicker and faster you can cut. Adapters for various electric receptacles are also included. This plasma cutter requires a minimum of a 6 CFM @ 90 PSI air compressor.

Often Rented With This Item:
Select any of the accessories below to purchase them with this inventory item:
Click here for more information on the features of this plasma cutter rental.

Mild Steel Recommended Cut Speeds at 40 Amps
Thickness/ Approximate Travel Speeds*
1/8 in. (3.2 mm) 156 IPM (3963 mm/min)
1/4 in. (6.4 mm) 64 IPM (1626 mm/min)
3/8 in. (9.5 mm) 36 IPM (915 mm/min)
1/2 in. (12.7 mm) 22 IPM (559 mm/min)
5/8 in. (15.9 mm) 13 IPM (330 mm/min)

Mild Steel Recommended Cut Speeds at 27 Amps
Thickness/ Approximate Travel Speeds*
12 ga. (2.8 mm) 115 IPM (2921 mm/min)
1/8 in. (3.2 mm) 88 IPM (2235 mm/min)
3/16 in. (4.8 mm) 50 IPM (1280 mm/min)
1/4 in. (6.4 mm) 28 IPM (711 mm/min)
3/8 in. (9.5 mm) 15 IPM (386 mm/min)
1/2 in. (12.7 mm) 8 IPM (203 mm/min)
5/8 in. (15.9 mm) 5 IPM (126 mm/min)
*Travel speeds are approximately 80% of maximum.

Back to Top